Справочник Пользователя для Ricoh AP505
Replacing Consumables
53
4
Replacing the Waste Toner
Bottle and Charger
Bottle and Charger
You should replace waste toner bottle
and charger whenever the following
messages appear on the panel dis-
play.
and charger whenever the following
messages appear on the panel dis-
play.
WASTE TONER
ALMOST FULL
WASTE TONER
FULL
R
WARNING:
R
CAUTION:
Note
❒ Before removing the waste toner
bottle from the printer, spread pa-
per or some other material around
the area you are working to keep
toner from making floor dirty.
per or some other material around
the area you are working to keep
toner from making floor dirty.
A
Turn on the printer’s power
switch.
switch.
B
Open the front cover by pushing
the front cover release button.
the front cover release button.
C
Hold the inset grips (green part)
of the photoconductor unit, and
pull the top side of the photocon-
ductor unit forward.
of the photoconductor unit, and
pull the top side of the photocon-
ductor unit forward.
D
Replace the waste toner bottle .
A Grasping the waste toner bot-
A Grasping the waste toner bot-
tle by its green tabs, remove it
from the printer.
from the printer.
•
Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
or used toner. Toner dust
might ignite when exposed to
an open flame.
•
Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
authorized dealer or at appro-
priate collection sites.
•
If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
er containers yourself, dis-
pose of them according to
your local regulations.
•
When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E
TFWX330E