Справочник Пользователя для Ricoh CP6346
Basics
44
2
Placing Originals
When using the exposure glass, place
the originals face down.
When using the ADF, place the origi-
nals face up.
the originals face down.
When using the ADF, place the origi-
nals face up.
Placing Originals on the
Exposure Glass
Exposure Glass
A
Lift the exposure glass cover.
Note
❒ Be sure to lift the exposure glass
cover more than 30 degrees.
B
Place the original face down on
the exposure glass. The original
should be aligned with the left
scale.
the exposure glass. The original
should be aligned with the left
scale.
1.
Left scale
2.
Positioning mark
C
Lower the exposure glass cover.
Placing Originals in the Auto
Document Feeder
Document Feeder
A
Adjust the guide to the original size.
B
Insert the aligned originals face
up into the ADF.
up into the ADF.
Note
❒ To avoid originals misfeeding,
fan the originals before placing
them in the ADF.
them in the ADF.
Limitation
❒ Approximately 50 originals (80
g/m
2
, 20 lb) can be inserted at a
time in the ADF. The first (top)
original will be fed first.
original will be fed first.
Note
❒ To avoid jamming, fan the orig-
inals before placing them in the
ADF.
ADF.
❒ The guides must fit snugly against
both sides of the stack.
C
Adjust print settings as necessary,
and then press the {Start} key.
and then press the {Start} key.
Note
❒ If the next original has been
placed in the ADF before the
machine stops, that original is
fed automatically.
machine stops, that original is
fed automatically.
AJK109S
ACY058S
AJK153S