Справочник Пользователя для Ricoh 3580DNP
Troubleshooting
146
4
kRemoving the Used Master
When k lights, it is time to empty the
master eject unit. It also lights when
the master eject unit is not set proper-
ly.
master eject unit. It also lights when
the master eject unit is not set proper-
ly.
Note
❒ Ink is easily removed from skin by
waterless hand cleaners followed
by washing with soap and water.
by washing with soap and water.
❒ Be careful not to get any ink on
your clothing while emptying the
master eject unit.
master eject unit.
❒ When Higher Security is on, you
have to enter the security code to
unlock the master eject unit.
unlock the master eject unit.
A
Prepare a container for the used
master.
master.
B
Open the front door.
C
Use handle (E1) to pull out the
master eject unit until it stops.
master eject unit until it stops.
D
Pull up handle (E2) and pull out
the master eject unit completely.
the master eject unit completely.
E
Hold the master eject unit upper
handle and turn it clockwise with
one hand while holding handle
(E1) with other hand (1).
handle and turn it clockwise with
one hand while holding handle
(E1) with other hand (1).
F
Remove the used master by push-
ing down the handle (1) towards
the waste container (2).
ing down the handle (1) towards
the waste container (2).
Note
❒ If you cannot remove the used
master completely, repeat step
F until all the master is re-
moved.
moved.
G
Reinstall the master eject unit,
making sure it clicks into posi-
tion.
making sure it clicks into posi-
tion.
H
Close the front cover.