Справочник Пользователя для M-S Cash Drawer 7193

Solving Problems

7193 Owner’s Guide

May 1996

30

The following conditions can be corrected generally without calling for service.
However, if problems persist, contact your service representative. See
“Contacting a Service Representative” on the next page.

Replace the paper roll. Do not operate the printer or host system if the printer
runs out of paper. The printer will not operate without paper, but it may continue
to accept data from the host system. Because the printer cannot print any
transactions, the data may be lost.

See “Loading and Changing Paper” on page 19 for more information. See
“Contacting a Service Representative” on the next page.

A problem or jam has occurred with the knife. Open the receipt cover and
visually inspect the knife inside the cover. Clear any jammed paper you can see.
Tear off any excess paper against the tear off blade.

Contact your service representative if this does not resolve the problem. See
“Contacting a Service Representative” on the next page.

Check that the receipt cover is completely closed. You can tell if it is not closed
properly if it swings open easily. When closed properly, it requires some exertion
to open because of the snug fit.

The following problems may require you to contact your service representative to
correct the problem.

There is a problem with the temperature of the printhead. It must remain within
a certain temperature range to operate properly. This problem will most often
occur when the printhead overheats rather than running under temperature.