Справочник Пользователя для M-S Cash Drawer 7193

Commands

7193 Owner’s Guide

May 1996

82

Enters a downloaded bit image (such as a logo) into RAM with the number of
dots specified by n1 and n2. It is available until power is turned off, another bit
image is defined, or either Initialize Printer (1B 40), or Define User-Defined
Character Set (1B 26)

, command is received.

A downloaded bit image and user-defined characters cannot be defined at the
same time. Any user-defined characters will be cleared from RAM when this
command is used. See the illustration on the next page for a representation of the
bit image.

1D 2A n1 n2 d1 ... dn

29 42 n1 n2 d1 ... dn

GS * n1 n2 d1 ... dn

Value of n1

Value of n2

1-56 (8 x n1 = Number of
Horizontal Dot Columns)

1-48 (Number of

Vertical Bytes)1

Bytes of Data (Printed
Down, Then Across)

1The number of bytes sent is represented by the following formula:
n = 8 x n1 x n2 (n1 x n2 must be less than or equal to 1344).