Справочник Пользователя для Lexmark X644e
Setting collation options
30
Copying
Setting collation options
If you want your copies collated, you don’t need to do anything; this is the default setting.
For example, two copies of three pages will print page 1, page 2, page 3, page 1, page 2, page 3.
If you don’t want your copies collated, you can change the setting.
For example, two copies of three pages will print page 1, page 1, page 2, page 2, page 3, page 3.
To turn collation off:
1
Place your original document in the automatic document feeder face-up, short-edge first.
2
Adjust the paper guides.
3
Touch
Copy
on the home screen.
4
Use the numeric keypad to enter the number of copies you want.
5
Touch
Off
if you do not want your copies collated.
6
Touch
Copy It
.
Placing separator sheets between copies
1
Place your original document in the automatic document feeder face-up, short-edge first.
2
Adjust the paper guides.
3
Touch
Copy
on the home screen.
4
Touch
Options
.
5
Touch
Separator Sheets.
Note:
Collation must be On for the separator sheets to be placed between copies. If Collation is Off, the
separator sheets are inserted after the job has been printed.
separator sheets are inserted after the job has been printed.
6
Touch
Copy It
.
Setting paper saving options
1
Place your original document in the automatic document feeder face-up, short-edge first.
2
Adjust the paper guides.
3
Touch
Copy
on the home screen.
4
Make your duplex choice.
5
Touch
Options
.
6
Touch
Paper Saver.
7
Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the same side of one
sheet, touch
sheet, touch
4 on 1 Portrait
.
8
Touch
Print Page Borders
if you want a box drawn around each page on the copies.
9
Touch
Copy It
.