Справочник Пользователя для Lexmark X548dte
57 Configuration change, some held jobs were not restored
Something has changed in the printer to invalidate the held jobs. Possible changes include:
•
The printer firmware has been updated.
•
Paper input options needed for the print job were removed.
•
The print job was created using data from a device in the USB port and the device is no longer in the USB port.
•
The printer hard disk contains print jobs that were stored while installed in a different printer model.
Touch Continue to clear the message.
58 Too many flash options installed
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
58 Too many trays attached
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
59 Incompatible tray [x]
Try one or more of the following:
•
Remove the specified tray.
•
Touch Continue to clear the message and continue printing without using the specified tray.
61 Remove defective disk
Try one or more of the following:
•
Remove the defective printer hard disk.
•
Install a different printer hard disk before performing any operations that require a printer hard disk.
Troubleshooting
248