Справочник Пользователя для Lexmark X658dtme

For 60–176 g/m

2

 (16–47 lb bond) paper, grain long paper is recommended. For paper heavier than 176 g/m

2

, grain

short is recommended.

Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the
paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper
containing fibers such as cotton can negatively affect paper handling.

For detailed information on paper with recycled fiber content, see “Using recycled paper and other office papers” on
page 87.

The following paper types are not recommended for use with the printer:

Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,
carbonless copy paper (CCP), or no carbon required (NCR) paper

Preprinted papers with chemicals that may contaminate the printer

Preprinted papers that can be affected by the temperature in the printer fuser

Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm
(±0.9 in.), such as optical character recognition (OCR) forms

In some cases, registration can be adjusted with a software application to successfully print on these forms.

Coated papers (erasable bond), synthetic papers, thermal papers

Rough-edged, rough or heavily textured surface papers, or curled papers

Recycled papers that fail EN12281:2002 (European)

Paper weighing less than 60 g/m

2

 (16 lb)

Multiple-part forms or documents

Using appropriate paper prevents jams and helps ensure trouble-free printing.

To help avoid jams and poor print quality:

Always use new, undamaged paper.

Before loading paper, know the recommended print side of the paper. This information is usually indicated on
the paper package.

Do not use paper that has been cut or trimmed by hand.

Do not mix paper sizes, types, or weights in the same source; mixing results in jams.

Do not use coated papers unless they are specifically designed for electrophotographic printing.

Use these guidelines when selecting preprinted forms and letterhead:

Use grain long for 60 to 90 g/m

2

 weight paper.

Use only forms and letterhead printed using an offset lithographic or engraved printing process.

Avoid papers with rough or heavily textured surfaces.

Paper and specialty media guidelines