Справочник Пользователя для Konica Minolta 752
5-3.Removing Jam
52 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
5-3. Removing Jam
When film jams occur during print, the error code and the description showing the details on the jam are
displayed on the message column. [TRAY OPEN], [COVER OPEN], or [SORTER COVER] is displayed
on the screen at the same time.
displayed on the message column. [TRAY OPEN], [COVER OPEN], or [SORTER COVER] is displayed
on the screen at the same time.
•
When [TRAY OPEN] is displayed;
Touch [TRAY OPEN] to open the tray.
The screen on the right shows an example where a film jam
occurs in the upper tray.
occurs in the upper tray.
The message of TRAY OPEN appears, then the tray pops out
slightly.
When the tray pops out, the procedure of removing a jammed
film is displayed on the control panel.
slightly.
When the tray pops out, the procedure of removing a jammed
film is displayed on the control panel.
•
When [COVER OPEN] is displayed;
Touch [COVER OPEN] to open the front cover.
The screen on the right shows an example where a film jam
occurs between
occurs between
the exposure section (sub-scanning unit)
and the elevator transport section.
The front cover will unlock after the message showing COVER
OPEN appears.
When you open the front cover, the procedure of removing a
film jam for each location is displayed on the control panel.
OPEN appears.
When you open the front cover, the procedure of removing a
film jam for each location is displayed on the control panel.
•
When [SORTER COVER] is displayed;
Touch [SORTER COVER].
The screen on the right shows an example where a film jam
occurs in
occurs in
the sorter
.
After displaying the message for opening the sorter cover, the
procedure of removing the sorter cover appears on the control
panel.
procedure of removing the sorter cover appears on the control
panel.