Справочник Пользователя для KYOCERA 2020D
2-4
Paper Handling
Selecting the Right Paper
This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn,
embossed, or contaminated with lint, clay, or paper shreds.
embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper
jams, and can shorten the life of the machine. In particular, avoid using
paper with a surface coating or other surface treatment. Paper should
have as smooth and even a surface as possible.
jams, and can shorten the life of the machine. In particular, avoid using
paper with a surface coating or other surface treatment. Paper should
have as smooth and even a surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains
plastic or carbon. The heat of fusing can cause such paper to give off
harmful fumes.
plastic or carbon. The heat of fusing can cause such paper to give off
harmful fumes.
Bond paper should contain at least 80% pulp. Not more than 20% of the
total paper content should consist of cotton or other fibers.
total paper content should consist of cotton or other fibers.
Paper Sizes
Cassettes and the MP Tray are available for the paper sizes shown
below. The dimensional tolerances are ±0.7mm for the length and width.
The angle at the corners must be 90° ±0.2°.
below. The dimensional tolerances are ±0.7mm for the length and width.
The angle at the corners must be 90° ±0.2°.
Smoothness
The paper should have a smooth, uncoated surface. Paper with a rough
or sandy surface can cause blank spaces in the printed output. Paper
that is too smooth can cause multiple feeding and fogging problems.
(Fogging is a gray background effect.)
or sandy surface can cause blank spaces in the printed output. Paper
that is too smooth can cause multiple feeding and fogging problems.
(Fogging is a gray background effect.)
MP Tray
Size
Cassette or
MP Tray
Size
Envelope Monarch
3-7/8 x 7-1/2 inches
Legal
8-1/2 x 14 inches
Envelope #10
4-1/8 x 9-1/2 inches
Letter
8-1/2 x 11 inches
Envelope DL
110 x 220 mm
ISO A4
148 x 297 mm
Envelope #9
3-7/8 x 8-7/8 inches
ISO A5
148 x 210 mm
Envelope #6
3-5/8 x 6-1/2 inches
ISO A6
105 x 148 mm
(FS-2020D: MP Tray
only)
(FS-2020D: MP Tray
only)
JIS B6
128 x 182 mm
Envelope C5
162 x 229 mm
Hagaki
100 x 148 mm
ISO B5
176 x 250 mm
Ofuku-Hagaki
148 x 200 mm
JIS B5
182 x 257 mm
Youkei 2
114 x 162 mm
Executive
7-1/4 x 10-1/2 inches
Youkei 4
105 x 235 mm
Oficio II
8-1/2 x 13 inches
Folio
210 x 330 mm
Statement
5-1/2 x 8-1/2 inches
16 kai
197 x 273 mm
Custom
Cassette: 140 x 210 mm to 216 x 356 mm (FS-2020D); 105 x 148 mm
to 216 x 356 mm (FS-3920DN and FS-4020DN)MP Tray: 70 x 148
mm to 216 x 356 mm
to 216 x 356 mm (FS-3920DN and FS-4020DN)MP Tray: 70 x 148
mm to 216 x 356 mm