Справочник Пользователя для KYOCERA 2020D

Connecting and Printing

4-3

Install the printer close to an AC wall outlet. If an extension cord is used, the 
total length of the power cord plus extension should be 5 meters (16 feet) or 
less.

1

Connect the power cord to the Power Cord Connector at the rear of 
the printer.

2

Connect the other end of the power cord to a power outlet.

3

Press the Power Switch to On ( | ). The printer begins to warm up.

Ensure the printer's power switch is off. Only use the power 

cord supplied with the printer. 

If you install the starter toner container and switch 

on the power, after a moment the message 

Please 

wait(Adding toner)

 is displayed. When the printer is first 

switched on after toner installation, there will be a delay of 
approximately 15 minutes before the printer gets ready to print. 
Once the 

[Ready] indicator lights, printer installation is complete.