Справочник Пользователя для LevelOne WPS 0100

 

Page 13 

Before performing client configuration, the following conditions must be met: 

• 

LevelOne Printer Server must be installed on your LAN 

• 

LevelOne Printer Server must be configured (refer to Chapter 3).  

• 

Both the LevelOne Printer Server and the attached printer must be powered ON. 

• 

If the client PC uses a Wireless connection to communicate with the LevelOne Printer 
Server, the PC's wireless settings must be correct, as described below. 

The WPS-0100 and WPS-0100USB incorporate Wireless Stations for IEEE 802.11b devices. 
This section is only relevant to users of the WPS-0100 and WPS-0100USB. 

To print to the WPS-0100 and WPS-0100USB, Wireless stations must ensure that the 
following Wireless Settings are correct. 

 

Must match the other Wireless stations, 
(WPS-0100 or WPS-0100USB) unless 
the SSID is null or "any".  

If its SSID is null or "any", a Wireless 
station can join any Ad-hoc group.  

Must match the Access Point. 

Should match the other Wireless 
stations (WPS-0100 or WPS-
0100USB). 

However, when joining an existing ad-
hoc group, a Wireless station must use 
the Channel in use, rather than its own 
Channel. 

Access Point sets the Channel 
used.  

Wireless stations 
automatically locate the 
correct channel. 

Must match the other Wireless stations. 
(WPS-0100 or WPS-0100USB) 

Must match the Access Point. 

 

To change these settings on your PC, use the software provided with your Wireless card. 

If your PC's wireless settings are not correct, you will not be able to print to the WPS-0100 or 
WPS-0100USB via a Wireless connection.