Справочник Пользователя для LevelOne WPS 0100

 

Page 18 

• 

We recommend changing the Printer name to indicate which device is on. 
(e.g. HP2100 on SCA43600_P1) 

• 

If prompted about Sharing the printer, do NOT enable Sharing 

• 

When the Printer installation is finished, it will be listed in the Configure Printer Port 
screen above. Select it and click "Connect". 

9.  You can now print using this printer. 

• 

To install additional Printers, repeat steps 6 to 8. 

• 

Use the Start menu to run this program in future. The default installation is Start - 
Programs -  Printer Server Utility - Printer Server Setup. 

• 

Print jobs can be managed like any Windows printer. Open the Printers folder (Start - 
Settings - Printers) and double-click any printer to see the current print jobs. 

• 

If the printer attached to the LevelOne Printer Server is changed, just run this program 
again, and select the correct printer. 

• 

To delete a port created by this setup program, use the Windows Delete Port facility: 

• 

Right-click any printer in the Printers folder, and select Properties. 

• 

Locate the Delete Port button. This button is on the Details or Ports tab, depending on 
your version or Windows. 

• 

If the LevelOne Printer Server's IP Address is changed, and you can no longer print, delete 
the port (see procedure above) and re -install it. 

The options for the Peer-to-peer Print Driver are accessed via the Port Settings button. 

Use Start - Settings - Printers to open the Printers folder, then right-click the Printer, and select 
Properties. The Port Settings button is on the Details or Ports tab, depending on your version 
of Windows. 

An example screen is shown below: