Справочник Пользователя для LevelOne WPS 0100

 

Page 46 

5.  Click Save to create the IPP port on your system. You will see a message confirming that 

the port has been created, then the following dialog: 

 

6.  Either select an existing printer to use the new port, and click OK.  

OR 

Click the Add New Printer button to create a new printer to use the IPP port. This will start 
the Add Printer wizard. Follow the prompts to complete the process. Ensure that the new 
printer uses the IPP port. 

 

Installation is now complete. 

• 

To create additional IPP Ports, repeat the entire procedure.  

• 

The Proxy Server and other options are set individually for each IPP Port. 

After the IPP port is created, you can reach the screen shown in Figure 18: IPP Port using the 
Windows Port Settings button: 

1.  Open the Printers folder (Start - Settings - Printers) 

2.  Right-click the IPP Printer, and select Properties.  

3.  Locate and click the Port Settings button (Details or Port tab, depending on your version 

of Windows). 

There are 2 settings - Retry Interval and Retry Count - which can be adjusted if you have 
problems connecting to the IPP Server. 

• 

Retry Interval sets the time interval (in seconds) between connection attempts. Increase 
this number if you have a poor connection, or the remote server is very busy. 

• 

Retry Count sets how many connection attempts will be made. Increase this number if 
you have a poor connection, or the remote server is very busy.