Справочник Пользователя для Savin F9199
More Transmission Functions
105
3
Automatic Redial
If a document cannot be transmitted
because the line is busy or due to a
transmission error, redialing is done
twice at 5-minute intervals for Imme-
diate Transmission, and four times at
5-minute intervals for Memory Trans-
mission. (The redialing interval and
number of retries may vary according
to country.)
If redialing fails, the machine cancels
the transmission and prints the Com-
munication Result Report or Commu-
nication Failure Report.
because the line is busy or due to a
transmission error, redialing is done
twice at 5-minute intervals for Imme-
diate Transmission, and four times at
5-minute intervals for Memory Trans-
mission. (The redialing interval and
number of retries may vary according
to country.)
If redialing fails, the machine cancels
the transmission and prints the Com-
munication Result Report or Commu-
nication Failure Report.
Batch Transmission
If you send a fax message by Memory
Transmission and there is another fax
message waiting in memory to be
sent to the same destination, that
message is sent along with your doc-
ument. Several fax messages can be
sent with a single call, thus eliminat-
ing the need for several separate calls.
This helps you reduce communica-
tion costs and transmission time.
Fax messages for which the transmis-
sion time has been set in advance are
sent by Batch Transmission when that
time is reached.
Transmission and there is another fax
message waiting in memory to be
sent to the same destination, that
message is sent along with your doc-
ument. Several fax messages can be
sent with a single call, thus eliminat-
ing the need for several separate calls.
This helps you reduce communica-
tion costs and transmission time.
Fax messages for which the transmis-
sion time has been set in advance are
sent by Batch Transmission when that
time is reached.
Note
❒ You can switch the Batch Trans-
mission function on or off with
User Parameters. See p.178 “User
Parameters” (switch 06 bit 4).
User Parameters. See p.178 “User
Parameters” (switch 06 bit 4).
❒ If you store the Batch Transmission
function in a User Function key,
you can turn it on or off by just
pressing that key. The User Func-
tion key indicator lights when
Batch Transmission is turned on.
you can turn it on or off by just
pressing that key. The User Func-
tion key indicator lights when
Batch Transmission is turned on.
Dual Access
The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory, or automati-
cally printing a report.
Since the machine starts sending the
second message immediately after
the current transmission terminates,
the line will be used efficiently.
Note that during Immediate Trans-
mission, when copying, or when the
User Tools menu is open, the machine
cannot scan in documents.
into memory even while sending a
fax message from memory, receiving
a message into memory, or automati-
cally printing a report.
Since the machine starts sending the
second message immediately after
the current transmission terminates,
the line will be used efficiently.
Note that during Immediate Trans-
mission, when copying, or when the
User Tools menu is open, the machine
cannot scan in documents.
ECM (Error Correction Mode)
This feature automatically resends
data that wasn't transmitted success-
fully using a system that complies
with international standards.
ECM requires that the destination
machine has the same feature.
data that wasn't transmitted success-
fully using a system that complies
with international standards.
ECM requires that the destination
machine has the same feature.
Parallel Memory Transmission
With this feature the machine can call
destinations while scanning docu-
ments. Compared with normal Mem-
ory Transmission (where the machine
calls once all the documents have
been stored), it is quick to verify
whether a connection has been made
or not.
Additionally, as scanning finishes
quicker than in Immediate Transmis-
sion, it is useful if you wish to take the
document back to your desk immedi-
ately. However, if the connection can-
not be made (for example if the line is
busy), normal Memory Transmission
takes place.
destinations while scanning docu-
ments. Compared with normal Mem-
ory Transmission (where the machine
calls once all the documents have
been stored), it is quick to verify
whether a connection has been made
or not.
Additionally, as scanning finishes
quicker than in Immediate Transmis-
sion, it is useful if you wish to take the
document back to your desk immedi-
ately. However, if the connection can-
not be made (for example if the line is
busy), normal Memory Transmission
takes place.