Справочник Пользователя для Mitsubishi Electronics CPK60DWS

•  Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.

•  Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to 

extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.

•  Clean the thermal head and platen roller to keep good print quality whenever you replace the print paper and ink ribbon.

•  Depending on the internal temperature, the printer may stop printing temporarily during printing. (The POWER indicator 

blinks green.) Please wait for the printer to resume printing.

  Do not touch the print paper.

•  Each time printing is completed, remove the prints. If the prints are not removed, a paper jam may occur.

•  Empty the paper strip bin frequently to prevent jamming the strips at the print outlet.

Securing band

(supplied)

Falling this printer due to shock or other reasons 

may cause injury.

For your safety, make sure to secure the printer 

by the following procedure when you decide the 

location of installation of the printer.

1.  Secure the securing band (supplied) to the printer 

with the screw (supplied).

2.  Secure the other side of the securing band to the 

installation location with the round head wood 

screw (supplied).

Screw (supplied)

Round head wood screw 

(supplied)

Washer 

(supplied)