Справочник Пользователя для IBM RS/6000 44P
Tape Cartridge Compatibility
The 8mm Tape Drive is compatible with existing 8 mm tape subsystems that comply to
the American National Standard (ANSI) X3B5–89-136, Rev. 6, Helical-scan Digital
Computer Tape Cartridge, 8 mm for Information Exchange. Refer to the following table
for information about specific tape compatibility.
the American National Standard (ANSI) X3B5–89-136, Rev. 6, Helical-scan Digital
Computer Tape Cartridge, 8 mm for Information Exchange. Refer to the following table
for information about specific tape compatibility.
Format Modes (C=compression mode)
8mm Tape
Drive
2.3GB
2.3 GB (C)
5.0 GB
5.0 GB (C)
7.0 GB
7.0 GB (C)
20.0 GB
20.0 GB
(C)
2.3 GB
Read /
Write
-
-
-
-
-
-
-
5.0 GB
Read /
Write
Read /
Write
Read /
Write
Read /
Write
-
-
-
-
7.0 GB
Read /
Write
Read /
Write
Read /
Write
Read /
Write
Read /
Write
Read /
Write
-
-
20.0 GB
Read Only
-
Read Only
Read Only
Read Only
Read Only
Read /
Write
Read /
Write
Setting the Write-Protect Tab on 8 mm Tape Cartridges
Set the write-protect tab on a tape cartridge so that you do not accidentally lose
information. The window on the tape cartridge controls write-protection. When the
window on a tape cartridge is closed, write-protection is set and information can be
read from the tape, but not written to it. When the window on a tape cartridge is open,
write-protection is not set and information can be read from the tape and written to it.
information. The window on the tape cartridge controls write-protection. When the
window on a tape cartridge is closed, write-protection is set and information can be
read from the tape, but not written to it. When the window on a tape cartridge is open,
write-protection is not set and information can be read from the tape and written to it.
1
Window open: Write-protect tab not set
2
Window closed: Write-protect tab set
Chapter 2. Using the 44P Series Model 170
21