Справочник Пользователя для IBM TF7
11. For thermal/impact printers, locate the ribbon cartridge and install it in the
printer. (See “Ribbon Loading” on page 49.) Be sure that the ribbon is routed
through the printhead correctly.
through the printhead correctly.
12. Load the paper roll into the printer. See “Paper Loading” on page 51 for
thermal/impact SureMark printers or “Paper Loading” on page 63 for
single-station SureMark printers.
single-station SureMark printers.
13. Installation is now complete. Go to Chapter 5, “Testing and Problem Analysis –
Models TI5 and TG5” on page 55 for thermal/impact printers or Chapter 7,
“Testing and Problem Analysis – Models TF7 and TM7” on page 67 for
single-station printers and run the offline tests.
“Testing and Problem Analysis – Models TF7 and TM7” on page 67 for
single-station printers and run the offline tests.
Installing for USB Communication
1. Disconnect the power brick from the printer, if one is connected.
2. Locate the rear cable connectors.
Cash
Drawer
Port
Drawer
Port
Power
Supply
Port
Supply
Port
Powered
USB Port
USB Port
Standard
USB Port
USB Port
Figure 8. USB Ports for Thermal/Impact SureMark Printers (View is from the bottom rear of the printer)
updated March 18, 2002
Chapter 2. Installation Instructions
15
|
|
|
||
||