Справочник Пользователя для IBM QMS 4525
Using the Stapler
4-13
Daily Operations
Using the Stapler
The system administrator sets the default stapling option in the Oper-
ator Control menu to enable or disable stapling. Multiple copies of
print jobs are stapled individually.
ator Control menu to enable or disable stapling. Multiple copies of
print jobs are stapled individually.
Stapling requires the following:
Staples must be loaded in the stacker/stapler.
The print job must contain at least 2 sheets. Up to 35 sheets can
be stapled and deposited in the upper or stacker output bins.
be stapled and deposited in the upper or stacker output bins.
The entire job can be held in the batch tray. The batch tray has a
maximum capacity of 35 sheets, but the actual capacity is deter-
mined by the Bin Capacities option in the Administration/Engine/
Finisher Setup menu.
maximum capacity of 35 sheets, but the actual capacity is deter-
mined by the Bin Capacities option in the Administration/Engine/
Finisher Setup menu.
Stapling is enabled from the Administration/Engine/Finisher
Setup menu, an application selection, the QMS DOC staple com-
mand, or a network print command.
Setup menu, an application selection, the QMS DOC staple com-
mand, or a network print command.
Refilling Staples
The optional stacker/stapler uses rolls of 10,000 staples. When a roll
of staples is used up,
of staples is used up,
CHECK STAPLES
displays in the message window and on the local and remote con-
soles.
soles.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500