Справочник Пользователя для IBM S544-5361-01
Chapter 8. Maintaining the Printer
8–13
2. Remove the cleaning connector cover.
a. Push in the tab [2] on the front of the connector cover [3] to disengage
it from its slot [1].
b. Pivot the cover to the front of the printer and disengage the rear clip [4]
from its slot [5]. You may have to move the cover from side to side
several times to disengage the clip. Be careful not to break the clip.
several times to disengage the clip. Be careful not to break the clip.
c. Unplug the connector [6] by pulling on the wires (not by pulling on the
white connector).