Справочник Пользователя для IBM S544-5361-01
3–2
IBM Network Color Printer Operator’s Guide
Loading Paper
This section tells you how to load paper in tray 1, tray 2, and the auxiliary tray.
Follow these guidelines when you load paper:
Follow these guidelines when you load paper:
• Make sure that the paper meets the printer’s specifications (see “Choosing
Paper” on page 2–2) and that it has been in the printer environment for at
least 24 hours before you use it. (This is especially important if you are in a
climate with high humidity.)
least 24 hours before you use it. (This is especially important if you are in a
climate with high humidity.)
• Do not load transparencies in tray 1 or tray 2. Use the auxiliary tray instead.
Loading Paper in Tray 1 and Tray 2
Tray 1 and tray 2 can each hold approximately 250 sheets of plain paper (at
80 g/m
80 g/m
2
). Paper sizes you can use are letter, legal, A4, and JIS B5.
Tray 1 and tray 2 each have a paper amount indicator that shows you how
much paper remains. The blue bar on the paper amount indicator gradually
goes out of view as paper runs out. When the blue bar has completely
disappeared, it is time to refill the tray.
much paper remains. The blue bar on the paper amount indicator gradually
goes out of view as paper runs out. When the blue bar has completely
disappeared, it is time to refill the tray.