Справочник Пользователя для IBM 1585 (MT 4539)

The following table lists the jam messages that can occur and the action necessary to clear the message. The jam 
message indicates the area where the jam occurred. However, it is best to clear the entire paper path to ensure you have 
cleared all possible jams.

Although there are several places a jam can occur, clearing the paper path is fairly easy depending on the jam message or 
messages displayed on the operator panel.

Note: The following clearing jam instructions may seem out of sequence. However, they have been grouped 

to help you quickly clear the print path.

Remove the paper from the multipurpose feeder.

Flex, fan, and restack the media, and place it into the multipurpose feeder.

Load the print media.

Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.

Press .

200, 201, and 202 Paper Jam Check Door A Open the side door, and remove the jam.

Open the side door and the Exit 2 door, and remove the jam.

Lower the duplex unit, and remove the jam. Open the side door and the 
Exit 2 door, and remove the jam.

Lower the duplex unit, and remove the jam. Open the side door, and 
remove the jam.

Open each tray, and remove any jammed media.

Remove all media from the multipurpose feeder, flex and stack the 
media, reload the multipurpose feeder, and adjust the guide.

Open the finisher door, bridge unit assembly, or output bin, then 
remove the jam.