Справочник Пользователя для IBM TG4
Setting
Default Value
Print Mode
00
Print Station Selected
02
User-Defined/Resident Character Sets
00
Code Page
01
Intercharacter Spacing (Single Byte)
03
Rotated Characters
00
Station for line spacing
02
Line Spacing all stations
Six LPI
Tab Positions
every 100 dots
Left Margin
00
Relative Position
00
Align Positions
00
Unidirectional printing
00
Horizontal Size of Bar Code
03
Vertical Size of Bar Code
A2
Position of HR
00
Font for HRI
00
Error Conditions:
None
Enable or disable the feed buttons
EIA-232 Syntax:
ESC c 5 n or X'1B;63;35;n'
where:
n=0
Enables feed buttons
n=1
Disables feed buttons
Default:
n = 0
Purpose:
To disable the feed buttons while in the middle of a transaction.
Remarks:
If the printer is set to have the buttons disabled, the offline tests will also be
disabled. Supported on all models except TI1 and TI2.
disabled. Supported on all models except TI1 and TI2.
Enable or disable the beeper (Models TF6 and TM6 only)
This command is supported only for Models TF6 and TM6.
EIA-232 Syntax:
ESC BEL n1 n2 or X'1B 07 n1 n2'
where:
n1
Enables or disables beeper.
X'00'
Disable beeper.
X'01'–X'FE'
Timed enable beeper.
X'FF'
Enable beeper.
n2
Sets the beeper volume and tone.
Updated April 2, 2009
Appendix D. EIA-232 programming information
143