Справочник Пользователя для IBM 6500

147

4.

Try to ping the Ethernet Interface IP address from a local Unix 
station to see if it can be seen on your network.

NOTE: You will only be able to communicate with the Ethernet 

Interface from a network station on the same subnet as the 
print server. The Ethernet Interface needs to be told about 
a default router/gateway so any packets that come in from 
a different subnet can be returned via this gateway. Please 
see “Communicating Across Routers” on page 148 to set 
this up.

BOOTP allows you to dynamically assign an IP address to the 
Ethernet Interface upon bootup. In addition, the BOOTP server can 
provide additional details like a default router/gateway address. To 
configure the Ethernet Interface with its TCP/IP settings using 
BOOTP:

1.

On your BOOTP server, make an entry in the /etc/bootptab file 
for the Ethernet Interface.

Syntax:

EthernetInterfaceIPname:\
:sm=netmask:\
:hd=homedirectory:\
:bf=null:\
:gw=defaultgateway:\
:ht=ethernet:\
:ha=ethernetaddress:\
:ip=ipaddress:\
:ts=timeserver:\
:to=timezone:

Example:

spike:\
:sm=255.255.255.0:\
:hd=/usr/null:\
:bf=null:\
:gw=192.75.11.1:\
:ht=ethernet:\
:ha=008072070060:\
:ip=192.75.11.9:\
:ts=192.75.11.7:\
:to=25200: