Справочник Пользователя для IBM 6500

344 

These settings alter the current or working settings in memory only. 
Therefore, they will be lost if the Ethernet Interface is power cycled. 
To ensure this does not happen, issue a save command so the 
current settings get written to flash memory.

set dest <dest> alternate [<alt_dest>]

Example: set dest d1prn alternate d4prn

Sets an alternate destination for a queue other than itself.

set dest <dest> backchannel [prn]

Example: set dest d1prn backchannel prn

Establish a return path for printer feedback for a given 
destination <dest>. The Ethernet Interface I/O port is
bi-directional, however, you will most likely use the same I/O 
port to which the destination is currently sending jobs.

set dest <dest> logpath <logpath>

Example: set dest d1prn logpath l4

Associate a logpath with a destination. Jobs sent to the named 
destination <dest> are logged according to the settings defined 
in the named logpath.

set dest <dest> model <model>

Example: set dest d1prn model m4

Associate a model with a destination. Jobs sent to the named 
destination <dest> are processed according to the options 
defined in the named model.

set dest <dest> name <new_name>

Example: set dest d1prn name line matrix

Change the current name of the destination <dest> to a new 
name as indicated by <new_name>. <new_name> must be 
nine characters or less or it will be truncated. These names are 
case sensitive.