Справочник Пользователя для IBM 1xR
Re-initialize the printer
Syntax:
ESC @ or X'1B40'
Purpose:
Re-initialize all printer setting to their default values and reset the impact
print head.
print head.
Remarks:
Commands in the print buffer are not lost when this command is issued.
The settings that are re-initialized follow (all numbers are in hex):
The settings that are re-initialized follow (all numbers are in hex):
Setting
Default Value
Print Mode
00
Print Station Selected
02
User-Defined/Resident Character Sets
00
Code Page
01
Intercharacter Spacing (Single Byte)
03
Intercharacter Spacing (Double Byte)
06
Rotated Characters
00
Station for line spacing
02
Line Spacing (all stations)
Six LPI
Tab Positions
every 100 dots
Left Margin (all stations)
00
Relative Position
00
Align Positions
00
Unidirectional printing
00
Horizontal Size of Bar Code
03
Vertical Size of Bar Code
A2
Position of HR
00
Font for HRI
00
Right Margin (all stations)
00
Error Recovery Color
00
Error Conditions:
None
Enable or disable the beeper
Syntax:
ESC BEL n1 n2 or X'1B 07 n1 n2'
where:
n1
Enables or disables beeper.
X'00'
Disable beeper.
X'01'–X'FE'
Timed enable beeper.
X'FF'
Enable beeper.
n2
Sets the beeper volume and tone.
Bits 0–3
The note. Bit 0 is the LSB.
Bits 4–5
The octave.
Chapter 2. Communication parameters
51