Справочник Пользователя для IBM 1220

You are using paper that does not meet 
the printer specifications.

See 

, or 

 for 

more information.

See 

 for information that 

can help prevent jams from occurring.

You have loaded too much paper or too 
many envelopes.

Make sure the stack of paper you load 
does not exceed the maximum stack 
height indicated at the back of the tray or 
on the multipurpose feeder.

Guides in the selected tray are not set to 
the appropriate position for the size paper 
loaded.

Move the guides in the tray to the correct 
position.

See 

 for detailed 

instructions.

The paper has absorbed moisture due to 
high humidity.

Load paper from a fresh package.

Store paper in its original wrapper until 
you load it.

See 

 for more information.

You have not cleared the entire paper 
path, or you did not open the door 
specified by the message to check for 
jams in this area.

Clear paper from the entire paper path, 
open the door indicated by the operator 
panel message, clear the jam, and close 
the door. The printer resumes printing.

See 

 for more 

information.

Jam Recovery in the Setup Menu is set to 
Off.

Set 

 to Auto or On.