Справочник Пользователя для Zebra Technologies P640i
4
P640i Card Printer User Guide
980541-001 Rev. A
Introduction
Printing basics
In the P640i the card is transported on a belt-driven truck that maintains precise registration
through the entire process of picking, cleaning, and
multi-pass printing. This means perfect color-to-color
registration time after time - no slippage, no
deterioration in print quality over time.
multi-pass printing. This means perfect color-to-color
registration time after time - no slippage, no
deterioration in print quality over time.
What to expect when you turn
on the power
on the power
1.
Nothing happens for two or three seconds, then;
2.
The READY light flashes yellow (indicating that
the laminator is warming up), and you will hear
the laminator is warming up), and you will hear
the fan running , and a clicking sound inside the printer (the flip station resetting itself).
Finally;
Finally;
3.
After a few minutes (3 to 5), the READY light will show steady green, indicating that the
printer is ready to print.
printer is ready to print.
The receiving tray for printed ID cards hooks onto the right side panel.
Power cord entry and ON-OFF switch are located on the rear
panel.
panel.
Card transport
knob
knob
Transport
motor
motor
Toothed blet
Card truck
Platen