Справочник Пользователя для Zebra Technologies P640i
980541-001 Rev. A
P640i Card Printer User Guide
65
Printer Properties
Navigate to Properties by following this sequence:
Start
> Printers (or Printers and Faxes) > Right click
Zebra P640i >
Properties
Most of the tabs on the Properties screen (General,
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with
Device Settings
, the location
for all driver-controlled adjustments and displays.
Start
> Printers (or Printers and Faxes) > Right click
Zebra P640i > Properties > Device Settings >
Status
Navigate to Properties by following this sequence:
Start
> Printers (or Printers and Faxes) > Right click
Zebra P640i >
Properties
Most of the tabs on the Properties screen (General,
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with
Sharing, etc.) are of the “set and forget” variety, page
TN8-8. We start here with
Device Settings
, the location
for all driver-controlled adjustments and displays.
Start
> Printers (or Printers and Faxes) > Right click
Zebra P640i > Properties > Device Settings >
Status
Print Jobs
The number of the print job that is currently being
processed. Next is meaningful only when the printer is
not being driven by a PC. If the printer is being driven
by a PC, the PC sets the job number to be the same as
the PC-assigned spooler job number before sending to
the printer.
processed. Next is meaningful only when the printer is
not being driven by a PC. If the printer is being driven
by a PC, the PC sets the job number to be the same as
the PC-assigned spooler job number before sending to
the printer.
Error Conditions: Normally, this displays “No
Error”.
Error”.
Images Left: The exact number of YMCK sets
remaining on the color ribbon, as reported by the color
ribbon core.
remaining on the color ribbon, as reported by the color
ribbon core.
Enabled Features:
Uv Printing is enabled in manufacture, or by field
technician.
technician.
ID/Code (the user password) is enabled by the user.
ID/Key requires installation of a physical key. This
displays “Yes” once the printer has locked itself to the
key, not just because it has the key installed.
displays “Yes” once the printer has locked itself to the
key, not just because it has the key installed.
Advanced: Click the Advanced button to display
Sensor Data
, below.
(Another way to display this screen is through this
sequence, see page TN8-5:
sequence, see page TN8-5:
Start
> Printers (or Printers
and Faxes) > Right click Zebra P640i > Properties >
Device Settings >
Device Settings >
Control > Advanced Utilities >
Show
Sensor Data)
Caution • Some of the sub menus under
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
Device Settings
Status
Caution • Some of the sub menus under
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
Device Settings are specific to the Print
station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
Device Settings
Status