Справочник Пользователя для Zebra Technologies P640i

74

P640i Card Printer User Guide

980541-001 Rev. A

3. If the computer continues to display “new 

hardware found” messages, disable them by 
choosing Install the software automatically, then 
waiting for Windows to respond with Cannot 
install this hardware. 

4. Select Don’t prompt me again to install this 

hardware, then click 

.

This section outlines the three ways of installing the 
P640i driver: 1) Direct from the Zebra Printer Setup 
screen (page TN9-3, which comes up automatically 
from the Driver CD, or from downloaded software, 
see Download on this page; 2) Using the Add a Printer 
procedure (page TN9-5), and; 3) Using the New 
Hardware Found Wizard procedure (page TN9-2). No 
matter which way you select, or allow Windows to 
select for you, have the Driver CD or downloaded 
software on hand before you start.

If you plan to connect the P640i Printer to the 
computer’s parallel port, 

 the computer, then 

make the connection. USB, which can be connected 
“hot”, has a faster data transfer rate, and is the 
preferred port.

Power up the printer and start the computer. If you do 
not see the following screen, install the driver from 
Zebra’s Printer Setup screen, or use the Add a Printer 
procedure .

1. Select Install from a list or specific location, then 

click Next.

2. If you have the Driver CD, place it in the CD-

ROM drive. If you are working instead with 
downloaded software (or if you think the 
download may be more recent), check Include 
this location in the search, then type in (or browse 
to) the download’s default location, 
c:\zebra\driver, unless you sent the unzipped files 
somewhere else. Click Next.

3. Following Step 2 the computer searches for a file 

named Atlprint.inf. If the search is successful, the 
following screen appears.

This screen warns that installation of the driver 
software may destabilize your system. The P640i 
driver software has been exhaustively tested in many 
installations, and has caused no problems of which 
Zebra is aware.

4. Click Continue Anyway, then Accept the License 

Agreement. If you are using a USB connection, 
the Browse Printers screen, right, displays the 
USB-connected printers. Highlight the printer 
serial number you are working on (even if there is 
only one listed), then click OK.

Only USB and Parallel versions 

are described here. The optional internal 
Ethernet port is configured in a different 
way, and may require technician help, 
see page TN9-6. For more information, 
contact Zebra tech support.

If you are using the 

 port to 

connect to your computer, make sure the 
computer is set to ECP mode before 
installing the driver. To do this you need to 
check the computer’s BIOS. For help, refer 
to your computer manual or consult your 
technician. You do 

 need to select ECP 

mode if you are using the 

 port.

The New Hardware Found message 

appears only if the P640i printer has never 
been installed on the computer to which it is 
now connected.