Справочник Пользователя для Zebra Technologies S4M

Operations
Select a Communication Interface

13290L-001 Rev. A

S4M User Guide

10/21/05

=

Optional Print Servers  Ethernet-based print severs also are available to connect your 
printer to a data source. Both wired and wireless options are available.

• With the ZebraNet Wireless Print Server board installed, a wireless PCMCIA card can be 

used to communicate with a network. For more information on this option, see the 
ZebraNet Wireless Print Server User Guide.

• ZebraNet 10/100 Print Server (10/100 PS). For more information on 10/100 PS, see the 

ZebraNet 10/100 Print Server User and Reference Guide.

Data cables must be fully shielded and fitted with metal or metallized connector shells. 
Shielded cables and connectors are required to prevent radiation and reception of electrical 
noise. 

To minimize electrical noise pickup in the cable:

• Keep data cables as short as possible.

• Do not bundle the data cables tightly with the power cords.

• Do not tie the data cables to power wire conduits.

16.4 ft (5 m) maximum

Zebra printers comply with FCC Rules and Regulations, Part 15 for Class B 

Equipment using fully shielded, 6.5 ft (2 m) data cables. Use of unshielded cables may 
increase radiation above the Class B limits.