Справочник Пользователя для Zebra Technologies Z4Mplus
106
Z4Mplus and Z6Mplus User Guide
Troubleshooting
Print Quality Problems
Communication Problems
Data light does not flash when a label format is sent.
Several labels print, then the printer skips, misplaces, misses, or distorts the image on
the label after a label is sent to the printer.
the label after a label is sent to the printer.
A label format was sent to the printer but not recognized. The DATA light flashes but
no printing occurs.
no printing occurs.
Problem
Solution
The printer does not respond to
label requests.
label requests.
Check the printer driver or software
communications settings.
communications settings.
Confirm you are using the correct
communication cable. See
communication cable. See
.
.
Ensure that the correct driver is being used.
Problem
Solution
The host is set to EPP parallel
communications.
communications.
Change the settings on the computer host
to standard parallel communications.
to standard parallel communications.
The serial communication
settings are incorrect.
settings are incorrect.
Standard RS-232 cables are appropriate for
lengths under 50 ft. (15.2 m); RS-422 and
RS-485 cables allow serial transmission up
to 4000 ft.(1.2 km). Check cable length and
shielding, and confirm the appropriate RS-
232, RS-422, or RS-485 setting is being
used.
lengths under 50 ft. (15.2 m); RS-422 and
RS-485 cables allow serial transmission up
to 4000 ft.(1.2 km). Check cable length and
shielding, and confirm the appropriate RS-
232, RS-422, or RS-485 setting is being
used.
Check the printer driver or software
communications settings.
communications settings.