Справочник Пользователя для Zebra Technologies 8

24

Zebra ZXP Series 8 Card Printer User’s Manual

P1045430-002 

Loading the Laminate

Step 1. Remove a new roll of laminate from its packaging. There are two different laminate 

rolls, one for the Upper Cassette (

) and one for the Lower Cassette (

). 

Step 2. Place the roll of laminate in the Upper Laminate Cassette (present on both the 

single-sided laminator and dual-sided laminator). Note the orientation of the laminate 
spool with respect to the laminate cassette as shown in the figure below.

Step 3. Pull out an inch or two of laminate past the lip of the cassette.

Step 4. Close the cassette by firmly pressing the “clamshell” together. You will hear a click 

and feel a detent when the halves of the cassette seat together.

Step 5. Remove a second new roll of laminate from its packaging (for dual-sided 

laminator only).

Step 6. Place the roll of laminate in the Lower Laminate Cassette (present on the dual-

sided laminator only). Note the orientation of the laminate spool with respect to the 
laminate cassette as shown in the figure below.

Important • The geared flange on the laminate spool is removable, but do not remove it. If it 
does come off, snap it back onto the end of the spool.