Справочник Пользователя для Zebra Technologies 8

42

Zebra ZXP Series 8 Card Printer User’s Manual

P1045430-002 

Installing the Windows Printer Driver

Step 1. If not already done, connect power to the printer. Turn power ON (

).

Step 2. Connect the Ethernet port on the rear of the printer to the Ethernet network 

connection or directly to the computer’s Ethernet port. 

Step 3. Ensure that the Printer’s power switch in the ON (

) position.

Step 4. Insert the User Documentation and Drivers CD into the CD drive of the host 

computer. The Main Menu will open.

Step 5. From the Main Menu, click Install Printer Driver.

Step 6. If an older Printer and Driver is installed on your computer, the Welcome window 

.

Step 7. In the Welcome window, choose the maintenance operation to be performed:

Select Modify to upgrade the older printer driver, click the Next button, and 
follow the screen prompts. When the Maintenance Complete window 
appears, click the Finish button. The upgrade is complete.

Select Remove to remove the older printer driver, click the Next button, and 
follow the screen prompts. At the end of the uninstall process, you will be 
asked to re-boot your computer. Re-boot, and start over with 

Note • To install the USB driver, see 

.

Important • The Ethernet Network must be configured correctly, with the Printer and the 
host computer on the same subnet. If you are not sure how to verify this or change the 
configuration, consult someone knowledgeable on Ethernet Networks.