Справочник Пользователя для Apple 220-240 V

Cannot check Signal in Ad hoc

An attempt to check the radio signal was made while the communication mode was set to [802.11 Ad
hoc] in the [Maintenance] menu.

• To check the radio signal, select Infrastructure in the communication mode settings.
• See p.61 "IEEE 802.11b (Wireless LAN) Configuration".

Cannot duplex Tray #

The selected tray is set to one sided tray when duplex mode is set.

• Cancel duplex mode. Alternatively, press the [Form Feed] key to select another tray, or cancel the

job.

• Contact the machine administrator.

Certificate auto renewal failed

Renewing the certificate automatically has failed.

• Call your service provider.

Change Setting Tray #/Paper Size: Paper Type

The printer detected that the actual paper type was not the same as the paper tray size and paper type
setting.

• Change the paper type via the paper type setting menu on the control panel or execute Form Feed

by pressing the [Form Feed] key, or cancel the job.

• Load the indicated tray with the correct paper, or change the paper type/size using the dial or using

the [Paper Input] menu on the control panel. Alternatively, select another tray by pressing the [Form
Feed] key, or cancel the job.

DHCP assigned Cannot change

An attempt to change the IP address, subnet mask or gateway address was made while [DHCP] was set
to [On].

• Make the change after setting [DHCP] to [Off].

Error: Enter 10 or 26 characters

The entered number of characters for the WEP Key (hexadecimal entry) is incorrect.

Error: Enter 5 or 13 characters

The entered number of characters for the WEP Key (ASCII entry) is incorrect.

9. Troubleshooting

146