Справочник Пользователя для Apple 220-240 V

Replace Print Cartridge soon

The printer is almost out of toner.

• Prepare a new toner Cartridge.

Reset Fusing Unit correctly

The fusing unit is not set correctly or is not set, or your fusing unit is improper.

• Set the fusing unit correctly, or set the proper fusing unit.
• See p.112 "Replacing the Maintenance Kit".

Reset the Job or Form Feed/Paper Size: Paper Type:

The printer detected that the actual paper type and size are not the same as the paper tray size setting and
the paper type setting.

• Load the indicated tray with the correct paper or change the paper type/size using dial or via the

special paper size setting menu on the control panel. Or otherwise, execute Form Feed by pressing
the [Form Feed] key, or cancel the job.

Reset Print Cartridge

The toner cartridge is not set correctly or not installed.

• Set the toner cartridge correctly. If the cartridge is installed, close the front cover and turn the power

switch to off and to on. If the message appears again, contact your sales or service representative.

Reset Tray # or Form Feed

The indicated paper input tray is not set correctly, or is not set.

• Set the indicated paper input tray correctly.

SC XXX-X Power Off On/Call Service if error reoccurs

The Service Code or SC number indicates the problem.

• Turn the power off, and then on. If the message appears again, contact your sales or service

representative. Report the error code that appears.

SD authenticatn. Failed

Authentication from the SD card has failed.

• Turn the power off, and then on. If the message appears again, contact your sales or service

representative.

SSID not entered

Wireless LAN's SSID is not entered.

9. Troubleshooting

150