Справочник Пользователя для Lenovo 57315603

33

User Guide

5.  Lift up the stand holder then slide out the foot cover as shown.

6.  To reattach the foot cover:

a.  Lift up the stand holder.
b.  Line up the foot cover with mounting holes on the back of the computer, 

then slide it back into position.

Replacing a memory module

  Attention: Turn off the computer and wait 3 to 5 minutes to let it cool 

down before removing the cover.

  Note: It may be helpful to place the computer face-down on a soft flat 

surface for this procedure. Lenovo recommends that you use a blanket, 
towel, or other soft cloth to protect the touch screen from scratches or 
other damage.

1.  Remove any media (disks, CDs, or memory cards) from the drives, shut down 

the operating system, and turn off the computer and all attached devices.

2.  Unplug all power cords from electrical outlets.
3.  Disconnect all cables attached to the computer. This includes power cords, 

input/output (I/O) cables, and any other cables that are connected to the 
computer. Refer to “Left and right views” and “Rear view” for help with locating 
the various connectors.

4.  Remove the stand base. Refer to “Removing the stand base”.
5.  Remove the foot cover. Refer to “Removing the foot cover”.