Справочник Пользователя для Toshiba L600D

To check if optical disk drive is malfunctioning or not, follow the troubleshooting procedures 
below as instructed. 

Procedure 1:    Diagnostic Test Program Execution Check 

Procedure 2:   Connector Check and Replacement Check 

 

Execute the CD-ROM/DVD-ROM Test in the Diagnostic Program. Refer to Chapter 3, Tests 
and Diagnostics for more information on how to perform the test program. 

Prepare the tools before the test.  

If any error is detected by the test, go to Procedure 2. 

The connection of optical disk drive and system board may be defective. Otherwise, they may 
be faulty. Disassemble the computer following the steps described in Chapter 4 and perform 
the following checks: 

Check 1 

Make sure optical disk drive is firmly connected to the connector on system board. 

 

 

If the connection is loose, reconnect it firmly and return to Procedure 2. If the 
problem still occurs, perform Check 2. 

Check 2 

Optical disk drive may be faulty. Replace it with a new one following the steps in 
Chapter 4. If the problem still occurs, perform Check 3.