Справочник Пользователя для Toshiba S2
1.2 System Unit
1 Hardware Overview
Tecra A3/S2 Series Maintenance Manual
1-13
Marvell 88E8053 for Giga LAN
?
PCI Express base specification 1.0a compliant
?
x1 PCI Express interface with 2.5 GHz signaling
?
Advanced error reporting
?
Message signaled interrupts
?
Configurable 48 KB deep buffer
?
On-chip VLAN insertion and removal
?
TCP, IP, UDP Checksum offload
?
Compliant to 802.3x flow control support
?
10/100/1000 IEEE 802.3 compliant
?
Automatic MDI/MDIX crossover at all speeds
?
Wake On LAN(WOL) power management support
?
Compliant to ACPI 2.0 specification
?
Smart power down when link is not detected
?
Marvell Virtual Cable Tester(VCT) for advanced cable diagnostics
Marvell 88E8036 for 10/100M LAN
?
PCI Express base specification 1.0a compliant
?
x1 PCI Express interface with 2.5GHz signaling
?
Active state power management (L0s) support
?
Adva nced error reporting
?
Configurable 4KB deep buffer
?
Message signaled interrupts
?
Compliant to 802.3x flow control support
?
10/100 IEEE 802.3 compliant
?
Wake On LAN(WOL) power management support
?
Compliant to ACPI 2.0 specification
?
Smart power down when link is not detected
?
Power regulator outputs for 2.5V and 1.2V supplies
Marvell 88SA8040 for Serial ATA Bridge
?
ATA/ATAPI PIO mode data transfer
?
ATA/ATAPI Ultra DMA(UDMA) data transfer rates of 16.7, 25, 33, 44, 66, 100,
133 and 150MB/s
?
Serial ATA power save modes
?
Serial ATA hot-plug
?
Enhanced receiving FIFO flow control for Serial ATA link
?
DMA Command Queuing(maximum 32 entries
?
Supports 20, 25, 30, or 40MHz reference clock.
?
Serial ATA Interface of 1.5Gbps
?
Full scan for high production test coverage