Справочник Пользователя для Toshiba A1

3.  Peel off the mask tapes from the sides of the display and remove the following screws 

fixing the LCD unit. 

•  M2x4  SUPER THIN BIND screw  x4 

4.  With the bottom edge of the LCD unit resting on the display cover, lift the top edge of 

the LCD unit. Peel off the glass tape and disconnect the LCD cable from the 
connector on the back of the LCD.  

5.  Remove the following screw fixing the FL inverter. 

•  M2x4   

SUPER THIN BIND screw  x1 

6.  Remove the insulator and disconnect the two cables from the connectors CN1 and 

CN2 on the FL inverter and remove the FL inverter. 

7.  Remove the LCD unit from the display cover. 

M2x4  SUPER THIN BIND

Mask Seal

M2x4  SUPER THIN BIND

Mask Seal

LCD Cable

CN2

Glass Tape

FL Inverter

M2x4  SUPER THIN BIND

Mask Seal

Mask Seal

Insulator

CN1