Справочник Пользователя для Toshiba 960-498
4 Replacement Procedures
4.18 Speaker/VGA fan
4.18 Speaker/VGA fan
Removing the Speaker/VGA fan
The following describes the procedure for removing the speaker and VGA fan (See Figure 4-
33).
33).
1. Pull out the speaker cable L (red cable) under the insulator and the glass tapes.
2. Remove the speaker L from the guide of base assembly.
3. Remove the speaker R from the guide of base assembly.
4. Remove the following screws securing the VGA EARTH SPRINGs and remove
them.
•
M2
×3C SUPER THIN HEAD screw
x2
5. Remove the following screws securing the VGA fan.
•
M2
×4B BIND
screw x2
6. Remove the VGA fan from the base assembly
M2.5x4B FLAT BIND
VGA EARTH SPRINGs
Speaker R
M2.5x4B FLAT BIND
Rib
Glass tapes
Insulator
Speaker cable L
Rib
VGA fan
Speaker L
Figure 4-33 Removing the speakers
QOSMIO F10 Maintenance Manual (960-498)
4-49