Справочник Пользователя для Fujitsu BS2OSD

 

Page 42

For BCAM problems: 

- activate all DCM traces with /DCDIAG DCM.,MODE=SAVE and 
  after reproducing the error, save the generated trace 

  files S.DCTRAC.* with /DCDIAG DCM.,MODE=CLOSE or submit 
  the diagnostic information to main memory with 

  /DCDIAG DCM.,MODE=HOLD  and evaluate it with ASTRID. 

 

For problems at the hardware and software interface: 

- HERSFILE 

- Hardware and software configuration 
- possibly IOTRACE listing. 

 
For tape problems: 

- if possible you should send in the original tape for 
  error diagnosis, otherwise you should at least provide 

  a listing of all tape labels and the first data blocks 
- SYSOUT log and CONSLOG file 

 
For SPD problems: 

- dump of the VTOC area 
- NDMDAMP 

- CONSLOG files of all systems involved 

 

  *4 

For IORM problems: 

  *4  

- IORM dump  

  *4 

 

- CONSLOG file  

  *4 

If problems occur with the IORM DPAV or IOLVM functions, under  

  *4 

VM operation these documents are required from both the guest  

  *4 

and the monitor system. 
 

 
Final note 

The above description does not contain any information on gener-
ating documents in conjunction with using BS2000 tracers. Please 

consult the reference manuals of the relevant tracers for this.