Справочник Пользователя для Epson 286 PLUS

3.

Place the front panel face down and use a

remove the screws securing the slot cover

out the slot cover, as shown below.

screwdriver to

to the panel. Lift

slot cover

Set the front panel, slot cover, and screws aside.

The hard disk drive cable is connected to the main system

board on the left side of the subassembly, as shown below.

hard disk drive cable

‘subassembly

Grasp the connector and pull it straight up to remove it

from the socket. Do not pull only on the cable.

5.

The diskette drive cable is connected to the socket just

behind the hard disk drive socket; disconnect it in the same
manner.

Installing and Removing Disk Drives

B-29