Справочник Пользователя для DELL 4200
Removing and Replacing Parts
4-9
Figure 4-9. Hard-Disk Drive Removal
5. Remove the four mounting screws that attach the hard-disk drive to the
carrier.
6. Disconnect the hard-disk drive from the connector on the back of the
carrier, and lift the drive from the carrier.
After you replace the drive and reinstall the carrier in the bay, turn on the system
if necessary. The online indicator (green) lights, indicating power is being sup-
plied to the hard-disk drive. With the controller connected, the activity LED is
activated when the controller spins up the drive.
if necessary. The online indicator (green) lights, indicating power is being sup-
plied to the hard-disk drive. With the controller connected, the activity LED is
activated when the controller spins up the drive.
CAUTION: When disconnecting the hard-disk drive from the con-
nector, grasp the connector, not the cable, to avoid damaging the
connector.
nector, grasp the connector, not the cable, to avoid damaging the
connector.
screws (4)
connector
carrier
hard-disk drive