Справочник Пользователя для IBM 1483
701344-003
3-9
Setup Menus, Controls, and Indicators
Intensity Control
The Intensity Control setting enables you to determine the area to be highlighted. There
are three settings for Intensity Control: Normal (the default), Data only, and Highlight.
It is available only on monochrome monitors.
are three settings for Intensity Control: Normal (the default), Data only, and Highlight.
It is available only on monochrome monitors.
To use the Intensity Control option, you must first set the Reverse Video option On
(black characters on an amber, green, or white screen). Highlight Intensity Control and
press the Enter key to cycle through the choices: Normal (the default), Data Only, and
Highlight.
(black characters on an amber, green, or white screen). Highlight Intensity Control and
press the Enter key to cycle through the choices: Normal (the default), Data Only, and
Highlight.
Figure 3-4. Intensity Control Options
Leaving the Offline Screen Menu
To leave the Offline Screen menu, use the Left and Right Arrow keys to highlight another
offline setup menu, or press the Reset key to leave Offline Setup mode and display the
Offline Test menu.
offline setup menu, or press the Reset key to leave Offline Setup mode and display the
Offline Test menu.
Normal
– The entire background field, data area and nulls, is highlighted.
Data only
– The background field, data only, is highlighted.
Highlight
– The foreground color is highlighted (only the data characters, not the nulls).
This is Normal Intensity.
This is Data Only Intensity.
This is Highlight Intensity.