Справочник Пользователя для Hitachi 8000
Changing from Desktop to Tower Configuration
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
avoid damage to the internal components of the computer.
5.
Place the computer firmly down into the stand.
Figure 2-7
Placing the Computer on the Stand
6.
Reconnect the external equipment, plug the power cord into a power outlet, and turn the computer
on.
on.
7.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
removed.
To change from the tower configuration to the desktop configuration, reverse the previous steps.
NOTE:
An optional Quick Release mounting bracket is available from HP for mounting the computer
to a wall, desk, or swing arm.
14
Chapter 2 Hardware Upgrades
ENWW