Справочник Пользователя для Apple MD094LL/A
iMac (27-inch, Mid 2010) Take Apart — General Information
132
2010-09-09
9. Using a whisk broom, clean the work surface of tiny glass particles.
10. Stand the iMac up and use a lint free cloth to carefully brush any of the particles off of the iMac
10. Stand the iMac up and use a lint free cloth to carefully brush any of the particles off of the iMac
onto the table. Clean the work surface again.
11. When the repair is finished the cloth should be disposed of immediately.
12. Use a broom and dustpan to sweep up as much of the broken glass as possible. Glass
fragments may have traveled several feet from the location of the glass panel, so be sure to
thoroughly clean the entire area. Use a vacuum to remove the smaller fragments not picked up
by the broom.
thoroughly clean the entire area. Use a vacuum to remove the smaller fragments not picked up
by the broom.
13. Note: A broken glass panel may leave one or more scratches on the LCD display depending
on the severity of the glass breakage. As long as the LCD itself has not been fractured the LCD
does not require replacement, but be sure to let the customer know that the scratches are
there and were caused by the broken glass panel.
there and were caused by the broken glass panel.