Справочник Пользователя для Apple MD094LL/A
iMac (27-inch, Mid 2010) Take Apart — Solid State Drive (SSD)
222
2010-09-09
Reassembly
1
Make sure the
Bluetooth cable
routes over the top of
the SSD drive and
pressure wall.
Bluetooth cable
routes over the top of
the SSD drive and
pressure wall.
2
On SSD-only configs
(no Hard drive), make
sure HDD temp
sensor jumper is
connected to HD
temp sensor
connector on logic
board.
(no Hard drive), make
sure HDD temp
sensor jumper is
connected to HD
temp sensor
connector on logic
board.
If jumper is absent,
the fans will run at full
speed.
the fans will run at full
speed.