Справочник Пользователя для Apple 9500/132

 

 Basics

Resetting the Logic Board - 18

 

5 Verify the power supply cable is disconnected from the 

logic board and then press the Power On button. (See 

"Logic Board Diagram" later in this chapter to locate the 

Power On button.)

6 Wait at least 10 minutes before replacing the battery. 

Make sure the battery is installed in the correct +/- 

direction.

7 Reassemble the computer and test the unit.

 

 This procedure resets the computer’s PRAM. Be sure 

to check the computer’s time/date and other system 

parameter settings afterwards.

 

 If this procedure resolves the problem, claim an 

adjustment on an SRO. If not, replace the defective 

component and DO NOT claim the adjustment procedure.