Справочник Пользователя для Acer POWER 8400
65
Onchip Legacy
Audio
Audio
This item is used to enable or disable
the onboard legacy audio.
the onboard legacy audio.
If enabled, the following parameters
can be selected:
can be selected:
SB I/O Base
SB IRQ Select
SB,DMA Select
MPU-401 I/O Address
Disabled
Enabled
220H, 240H,
260H, and 280H
260H, and 280H
IRQ5, IRQ7,
IRQ9, and IRQ10
IRQ9, and IRQ10
DMA1, DMA0,
DMA2, and
DMA3
DMA2, and
DMA3
330-333, 300-
303, 310-313,
and 320-323H
303, 310-313,
and 320-323H
Onboard FDD
Controller
Controller
Setting this parameter to Enabled
allows you to connect your floppy
disk drives to the onboard floppy
disk connector instead of a separate
controller card. Change the setting
to Disabled if you want to use a
separate controller card.
allows you to connect your floppy
disk drives to the onboard floppy
disk connector instead of a separate
controller card. Change the setting
to Disabled if you want to use a
separate controller card.
Enabled
Disabled
Disabled
Onboard Serial
Port 1
Port 1
This item allows you to assign an
address and interrupt for the board
serial port.
address and interrupt for the board
serial port.
3F8/IRQ4
Auto
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Disabled
Onboard Serial
Port 2
Port 2
This item allows you to assign an
address and interrupt for the board
serial port.
address and interrupt for the board
serial port.
2F8/IRQ3
Auto
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Disabled
Disabled
Parameter
Description
Options
Ap8400-e.book Page 65 Friday, October 1, 1999 2:20 PM